Showing posts with label Buttonstand. Show all posts
Showing posts with label Buttonstand. Show all posts

Saturday, February 27, 2010

Paul Smith modifications - a review

As the proud owner of one of Steve Ricks’ famous Tennant Coats, it was only a matter of time and money before I commissioned him again. This time though, it was the Matt Smith look I was working on.


A bit of background: when those pictures were published of that Southerndown beach shoot in July last year, a lot was made of the tweed and bow tie. However, for me, the two most striking elements of the costume were the boots (oh those elusive All Saints...) and the shirt; such a strange but stylish pattern, when combined with the bow tie and tweed gives a strangely modern but retro look at the same time. In fact, when I first snapped eyes on the shirt I thought ‘old-man’s shirt’ - kind of knackered, charity shop style. It wasn't until you venture up close and see that design that you realise there is more than meets the eye.

My good friends on Gallifrey Base went into costume over drive and we soon worked out the various brands: All Saints boots, Topman trousers, Harris Tweed jacket and... a Paul Smith shirt. Yes PS by Paul Smith to be precise, but I was surprised.

I checked out the John Anthony website and they were selling the burgundy shirt, but only had S, M and XXL. Now if I knew what I know now about the sizing, I would've snapped up the XXL there and then, however I decided that at £55, I wanted a good fit. So I noticed an alternate colour, navy blue and grabbed an XL and was disappointed to find it was very very snug. Now I don’t consider myself a particularly large chap, but I was making this thing bulge out in a not too attractive manner! So, in the wardrobe it went for a while.

When subsequent filming shots of Matt Smith were released from Croatia (I think), he was sporting that navy shirt (he had been in burgundy up until then). I was immediately fired up to get this shirt of mine wearable. Enter Steven Ricks.

So impressed was I by his customer service and top quality work, I asked him whether he could mod my blue shirt in the MS style - the factory shirts come with little blue sleeve straps to tie the rolled sleeves back. These are removed and stitched onto the edge of the cuff to create a distinctive finish. Also, the buttons are covered by fabric on the PS shirt but not on the Doctor’s.

Steve told me to send the shirt to him so he could examine the pattern so he could prepare a reproduction and while it was in his possession, he would perform the mods. Not only that, but he said that he could also provide me with more breathing space by letting it out at the back.

When the shirt returned to me a few weeks later, it was as you will see it on screen. Finished beautifully, the cuffs are brilliant now and the buttons are visible (on a button stand I believe - am not particularly well versed in tailoring parlance). But this is the clincher - it fits like an XL now. God knows what kind of sizing Paul Smith were using for the factory shirts - I nearly went for a Large, which is what I am in a Marks & Spencer type shirt. All this for a very reasonable price.

Steve Ricks: The man is versatile, thoughtful, very amiable and communicative and above all, his final product is so worth investing in. I can now wear this shirt day to day and not worry about breathing in the whole time. Money well spent.

All I need to do now is find those damn boots...

Thursday, February 25, 2010

11 shirt - Paul Smith modifications pt3

Today I tackled the buttonstand on the Paul Smith PS shirt, and found sometimes things are easy, and sometimes they are not!

The shirt Matt Smith wears, although it is a Paul Smith PS shirt, has visible buttons when it is worn (see right).
Studying the pictures, the buttonstand needs to be a full three columns of squiggles wide, lined up accurately on either edge (see right, inset). So I need to bear this in mind when I am reworking the fabric available.

The original shirt has a concealed buttonstand, making a very clean line (see left).

Sometimes these concealed stands are tacked halfway between the holes to help keep it in place, but thankfully this shirt does not have that, which should make things a little easier.

This is very simply created with a single line of stitch which basically forks the shirt front into two equal width fold: the lower has the buttonholes; the upper hides them from view.

The best way to show how the fabric is folded and sewn is in this diagram (see left).

I have a couple of shirts to do modifications on, one for myself and a couple for friends. Mine is a XXL shirt, and both of my friends’ ones are XL in size.

Before starting work I need to take a little time to look the shirts over and asses what to do and the current structure of the shirt.
To my surprise I noticed something curious, and a little annoying!

My XXL shirt has the buttonstand’s edge lining up with the edge of the column (just the way is needs to be) (see right), but both the XL sizes has it breaking a column in half (see far right).
This makes my work a little harder, since it means I cannot use the existing buttonholes for the XL size, and my approach for each will be very different.

Either-way, I need to unpick the existing placket to see what I have to work with. There is a single line of stitch which makes this, and I need to release the top and bottom so I can press it out flat (see left).

Now what I do depends on how the shirt was originally made.

Buttonstand for XL
Both the XL shirts I have have the pattern falling in exactly the same place, with the edge of the existing buttonstand cutting a column of squiggles in half. This renders the existing buttonholes useless to me.

I therefore have to cut them clean off, which I do as close to the holes as I can (see right).

I then press everything out flat and see where the column of squiggles line up with the front of the collar stand, as this will determine where I start from. I can then press the left edge of the new buttonstand and the width of it to three columns wide.

All I then need to do is pleat what is left to create an edge between the new buttonstand and the shirt front.

It was difficult to show this in photos, but I have done another diagram to show what I mean (see above). This is what I am aiming to achieve for both sizes of shirts.

I then had to re-sew the buttonholes through the new stand I had created (see right). I kept the discarded strip of original buttonholes and use this as a position guide.
For my own reference my settings on my buttonholer were:
 Length=halfway Bight=H Space=A.

The finished result came out pretty well (see left).


I am very pleased that the front edge of the buttonstand lines up perfectly with the collar stand.

The second XL shirt I had to do modifications to was the alternative blue version, which Matt Smith has been seen wearing in some of the later episodes, as well as the new series teaser trailer.

Buttonstand for XXL
The XXL shirt has the existing buttons in the right position, so this one is a little easier to do.

Again I unpick the existing buttonstand and open it out to reveal as much fabric as possible, which I then press out flat.

I then fold and press the edges of the new buttonstand to three columns of pattern, with the existing buttonholes in the centre.

It is then a relatively simple process to re-pleate the rest of the edge to create position the new buttonstand in the correct place, following the above diagram as closely as I can. This is stitched through all layers to the front (see right).

It does, however, finish with the edge just short of the collar stand (see left), but this isn’t visible when the shirt is buttoned up.