Showing posts with label Paul Smith PS. Show all posts
Showing posts with label Paul Smith PS. Show all posts

Wednesday, May 12, 2010

Series Five costume index

A while back over on my Third Doctor Blog I ran a series of features about Jon Pertwee’s costume changes during his run as The Doctor.
I wrote it because I was curious to work out the transition from his first year when he wore the same clothes all season, through to his last where he rarely wore the same thing twice!

Matt  Smith’s costume appeared at the outset to be a fairly fixed affair, but as the series has progressed a number of subtle variants have emerged. What follows is an attempt to document these in one place.
All of the images below have been grabbed from the HD transmissions. Click on them to view in full resolution.
The Eleventh Hour

Jacket Donegal Tweed
NB: There is a minor continuity error in the closing scene, where a close-up shows The Doctor wearing the Harris Tweed jacket (see right) which does not appear for two episodes.

Shirt Burgundy Paul Smith

Trousers Dogtooth design skinny jeans from TopMan
NB. These jeans can be quickly identified by the visible metal waistband button at the top of the fly (see below).

Boots All Saints Layer boots

The Beast Below

Jacket Donegal Tweed

Shirt Burgundy Paul Smith

Trousers Dogtooth design skinny jeans from TopMan

Boots All Saints Layer boots 
Victory Of The Daleks

Jacket Harris Tweed in Mackenzie two-by-two dogtooth weave

Shirt Blue Paul Smith

Trousers Plain charcoal skinny jeans
NB. These jeans can be distinguished from the dogtooth jeans by their clean closure at the waistband with no visible button (see right).

Boots Unidentified brown boots

The Time Of Angels
Flesh & Stone

Jacket Harris Tweed in Mackenzie two-by-two dogtooth weave

Shirt Burgundy Paul Smith
NB. The cuffs have two buttons (so it is not the French Cuff Shirt I featured last month - sorry Ryan), but Matt wears the shirt with only one of these buttons done up (see below, bottom left)

Trousers Dogtooth design skinny jeans from TopMan
NB. These jeans can be quickly identified by the visible metal waistband button at the top of the fly (see above, top left).

Boots All Saints Layer boots

Vampires Of Venice

Jacket Donagal Tweed

Shirt Blue Paul Smith
NB. The matching blue bow tie has an interesting woven knot (see above, top right)

Trousers Dogtooth design skinny jeans from TopMan
NB. Note the visible metal waistband button at the top of the fly (see above, top & bottom left).

Boots All Saints Layer boots
Amy’s Choice
Upper Ledworth scenes

Jacket Donagal Tweed

Shirt Blue Paul Smith
NB. The blue bow tie Matt wears, as well as being narrower than the burgundy one, appears to have a faint woven pattern in it (see above, bottom right). Bow ties are cool!

Trousers Dogtooth design skinny jeans from TopMan
NB. These jeans can be quickly identified by the visible metal waistband button at the top of the fly (see above, top left).

Boots All Saints Layer boots

TARDIS scenes


Jacket Donagal Tweed

Shirt Burgundy Paul Smith

Trousers Dogtooth design skinny jeans from TopMan

Boots All Saints Layer boots

The Hungry Earth & Cold Blood

Jacket Donagal Tweed

Shirt Burgundy Paul Smith

Trousers Dogtooth design skinny jeans from TopMan
NB. These jeans can be quickly identified by the visible metal waistband button at the top of the fly (see above, top left and bottom right).

Boots All Saints Layer boots

Vincent And The Doctor

Jacket Donagal Tweed

Shirt Navy Paul Smith

Trousers Dogtooth design skinny jeans from TopMan

Boots All Saints Layer boots

The Lodger

Jacket Donagal Tweed

Shirt Navy Paul Smith

Trousers Dark grey skinny jeans from Top Man

Boots All Saints Layer boots

NB. This episode has probably the best close-up of The Doctor’s watch (see right).
The Pandorica Opens
& The Big Bang

Jacket Donagal Tweed

Shirt Burgundy Paul Smith

Trousers Dogtooth design skinny jeans from TopMan

Boots All Saints Layer boots

NB. The Doctor is also seen in top hat and tails for the closing wedding scenes (see above, bottom right).

If you spot a variant I have missed, please drop me a line at tennantcoat@me.com so I can amend my information.

Sunday, May 2, 2010

11 shirt - pattern cutting

A couple of months back I started work on producing a replica Matt Smith shirt.
To make it work I need to pull two aspects of the shirt together before I can make my first one.

Firstly, I needed to match the squiggly pattern design, which I have now done (see left), as well as the stripes for the cuffs.
You can read about that under Pattern Repeat and Screen-accurate Cuffs.

The other thing I need to do is sort out the pattern for the shirt itself.

Although I have a couple of Paul Smith shirts, each to a differing fit, my plan is to make a shirt that is much more of a classic size, rather than the over-tailored tight fit of the Paul Smith originals.

But instead of pattern trace my shirts, I am going to use a commercial pattern by Burba (see right) as a starting point.

It is a fairly straight forward shirt pattern with a number of permutations of style, but I will be making my own adaptions based on what I have learnt on my recent college course, as well as how the real Paul Smith shirts are cut.

I also have a cunning plan to make the cutting of the shirts a lot easier in the long term. I was originally going to have the fabric printed, then cut it out to my adapted pattern.
However, I have realized I need to make quite a few changes, so my plan is to make all those changes in a digital format, then directly apply the pattern shapes to the printed fabric itself.

First thing I need to do is scan the entire Burba pattern, which I have to do in A4 bits and patch together (see left).
To aid matching up, I spray-mounted it onto dot and cross paper first, giving me alignment reference. This also made it more robust for scanning.

I will not be using all the pieces. For example the collar comes in three styles (see on the left edge of the image), but none of them are to the right shape. This I will crib directly from my Paul Smith shirts.

I then retouched to remove the background paper colour so it was easier to trace in Illustrator (see above).

The pattern contains a range of sizings, from S to XXL, all of which are superimposed on top of each other. You can see this in the sleeve shape.

To start with I will trace the L size and make sure the pattern works. Adapting it for the other sizes will then be a very simple job.


Anyway, after tracing just the pattern pieces I need, and making the necessary adjustments and adaptions along the way, I can then impose them together.
I need to remember to duplicate and flip certain pieces, such as the sleeves, and mirror others such as the back, only half of which comes in the pattern.

The outlines are then transfered into Photoshop and used as a mask to outline the shapes I need (see left).

I have filled the spaces available on this first run with spare sleeve plackets.

Due to a size limit on files for Spoonflower, I had to break the pattern across two sheets: one with the body of the shirt and the collar (see above); the other with the sleeves and cuffs (see below).

As a back-up insurance policy, I also made up a single yard of plain pattern repeat, in case part of my design does not work as intended. I can then redesign it and cut it from the spare fabric before feeding the revisions back to my master pattern.

It’s then just a matter of placing the order and waiting for the fabric to arrive.

Well, all that was a few weeks back and this weekend the package arrived (see below).
A quick inspection and everything looks to have worked just as I planned. All I need to do now is cut it out, and make up my first working prototype.

Very exciting stuff!

Friday, April 23, 2010

The Third Way

After everyones excitement of find the Paul Smith PS shirts last year in burgundy and blue; then the discovery of another shirt in blue, but with more screen-accurate cuff; there now comes yet another variation!!


This time it has cuffs with stripes, but these cuffs are french-style cuffs, intended for use with cuff links, though there does appear to be a button to do them up with as well (see below, left).


Paul Smith shirts often like to have little hidden details that only the wearer knows about and can see. The striped fabric is on the inside of the french-cuffs, and when worn conventionally cannot be seen (see above, left).

They could be folded inside out to display the stripes, though it would make them a bit bulky.

Thanks go to Ryan for sending me the pictures and sharing with us his amazing find.
Well done Ryan!!!
(And well done for wearing your watch face down.)

Saturday, February 27, 2010

Paul Smith modifications - a review

As the proud owner of one of Steve Ricks’ famous Tennant Coats, it was only a matter of time and money before I commissioned him again. This time though, it was the Matt Smith look I was working on.


A bit of background: when those pictures were published of that Southerndown beach shoot in July last year, a lot was made of the tweed and bow tie. However, for me, the two most striking elements of the costume were the boots (oh those elusive All Saints...) and the shirt; such a strange but stylish pattern, when combined with the bow tie and tweed gives a strangely modern but retro look at the same time. In fact, when I first snapped eyes on the shirt I thought ‘old-man’s shirt’ - kind of knackered, charity shop style. It wasn't until you venture up close and see that design that you realise there is more than meets the eye.

My good friends on Gallifrey Base went into costume over drive and we soon worked out the various brands: All Saints boots, Topman trousers, Harris Tweed jacket and... a Paul Smith shirt. Yes PS by Paul Smith to be precise, but I was surprised.

I checked out the John Anthony website and they were selling the burgundy shirt, but only had S, M and XXL. Now if I knew what I know now about the sizing, I would've snapped up the XXL there and then, however I decided that at £55, I wanted a good fit. So I noticed an alternate colour, navy blue and grabbed an XL and was disappointed to find it was very very snug. Now I don’t consider myself a particularly large chap, but I was making this thing bulge out in a not too attractive manner! So, in the wardrobe it went for a while.

When subsequent filming shots of Matt Smith were released from Croatia (I think), he was sporting that navy shirt (he had been in burgundy up until then). I was immediately fired up to get this shirt of mine wearable. Enter Steven Ricks.

So impressed was I by his customer service and top quality work, I asked him whether he could mod my blue shirt in the MS style - the factory shirts come with little blue sleeve straps to tie the rolled sleeves back. These are removed and stitched onto the edge of the cuff to create a distinctive finish. Also, the buttons are covered by fabric on the PS shirt but not on the Doctor’s.

Steve told me to send the shirt to him so he could examine the pattern so he could prepare a reproduction and while it was in his possession, he would perform the mods. Not only that, but he said that he could also provide me with more breathing space by letting it out at the back.

When the shirt returned to me a few weeks later, it was as you will see it on screen. Finished beautifully, the cuffs are brilliant now and the buttons are visible (on a button stand I believe - am not particularly well versed in tailoring parlance). But this is the clincher - it fits like an XL now. God knows what kind of sizing Paul Smith were using for the factory shirts - I nearly went for a Large, which is what I am in a Marks & Spencer type shirt. All this for a very reasonable price.

Steve Ricks: The man is versatile, thoughtful, very amiable and communicative and above all, his final product is so worth investing in. I can now wear this shirt day to day and not worry about breathing in the whole time. Money well spent.

All I need to do now is find those damn boots...

11 shirt - Paul Smith modifications pt4

I’ve now finished the three main modifications I needed to do no my Paul Smith PS shirt to make it into a Matt Smith shirt: Breast Pocket, Cuffs and Buttonstand.

There is, however, one more modification I am going to make, which may not be strictly screen-accurate – but it’s for my own personal comfort!

The Paul Smith PS shirt is very tailored, in that it is very fitted and quite tight around the middle, being intended for a considerably slimmer frame than most normal body sizes.
The shirt I bought was an XXL, which for me is ludicrous, as I normally wear a simple L. As a result, the sleeves are bordering on being too long and the collar is slightly too big for my neck, BUT the body of the shirt is tight around me.

Having studied the shirt carefully, I realize there is an easy way that I can make it fit better. The back of the shirt has a dart on either side, taking in around and inch each side (see above).

Notice how the shirt is quite taught around my tailor’s dummy.

Because the shirt isn’t lined, these darts are simply sewn and the fabric is not cut in any way, so I can carefully unpick them and press them flat.
There will be a little scarring where the stitching was, but this will be in the back and will hopefully get lost in the pattern of the fabric anyway.

Furthermore, the centre of the back has a double-pleat, as do most dress shirts. However, a conventional shirt has just the tops of these pleats sewn at the yolk-line, allowing the folds to drop out within a few inches. The Paul Smith PS shirt does this a little differently, with a line of stitching running the full length down the back to keep the pleat sharp to the hem. My plan is to unpick this as well and re-sew the hem opened out, giving a further inch and a half across the back.

This will give me a grand total of an extra 3.5 inches across the width of the back!

The fabric is very thin and delicate, so the un-picking has to be done with care. All goes well and after doing all I intended I find the back has become a lot more loose as required.

All I then need to do is re-hem the bottom where I have released the centre back pleat (see left).

So finally I have done all the modification I wanted to do and have a shirt ready to wear  – with comfort!

You can see in the picture (see right) how loose the back now is compared to the BEFORE picture at the top of this posting (shown again, below).








So at last I now have my fully modified shirt ready to wear!
below is the burgundy version for myself.


And here is the blue version for my friend.
Look out for his Review of his shirt in a future posting.

Thursday, February 25, 2010

11 shirt - Paul Smith modifications pt3

Today I tackled the buttonstand on the Paul Smith PS shirt, and found sometimes things are easy, and sometimes they are not!

The shirt Matt Smith wears, although it is a Paul Smith PS shirt, has visible buttons when it is worn (see right).
Studying the pictures, the buttonstand needs to be a full three columns of squiggles wide, lined up accurately on either edge (see right, inset). So I need to bear this in mind when I am reworking the fabric available.

The original shirt has a concealed buttonstand, making a very clean line (see left).

Sometimes these concealed stands are tacked halfway between the holes to help keep it in place, but thankfully this shirt does not have that, which should make things a little easier.

This is very simply created with a single line of stitch which basically forks the shirt front into two equal width fold: the lower has the buttonholes; the upper hides them from view.

The best way to show how the fabric is folded and sewn is in this diagram (see left).

I have a couple of shirts to do modifications on, one for myself and a couple for friends. Mine is a XXL shirt, and both of my friends’ ones are XL in size.

Before starting work I need to take a little time to look the shirts over and asses what to do and the current structure of the shirt.
To my surprise I noticed something curious, and a little annoying!

My XXL shirt has the buttonstand’s edge lining up with the edge of the column (just the way is needs to be) (see right), but both the XL sizes has it breaking a column in half (see far right).
This makes my work a little harder, since it means I cannot use the existing buttonholes for the XL size, and my approach for each will be very different.

Either-way, I need to unpick the existing placket to see what I have to work with. There is a single line of stitch which makes this, and I need to release the top and bottom so I can press it out flat (see left).

Now what I do depends on how the shirt was originally made.

Buttonstand for XL
Both the XL shirts I have have the pattern falling in exactly the same place, with the edge of the existing buttonstand cutting a column of squiggles in half. This renders the existing buttonholes useless to me.

I therefore have to cut them clean off, which I do as close to the holes as I can (see right).

I then press everything out flat and see where the column of squiggles line up with the front of the collar stand, as this will determine where I start from. I can then press the left edge of the new buttonstand and the width of it to three columns wide.

All I then need to do is pleat what is left to create an edge between the new buttonstand and the shirt front.

It was difficult to show this in photos, but I have done another diagram to show what I mean (see above). This is what I am aiming to achieve for both sizes of shirts.

I then had to re-sew the buttonholes through the new stand I had created (see right). I kept the discarded strip of original buttonholes and use this as a position guide.
For my own reference my settings on my buttonholer were:
 Length=halfway Bight=H Space=A.

The finished result came out pretty well (see left).


I am very pleased that the front edge of the buttonstand lines up perfectly with the collar stand.

The second XL shirt I had to do modifications to was the alternative blue version, which Matt Smith has been seen wearing in some of the later episodes, as well as the new series teaser trailer.

Buttonstand for XXL
The XXL shirt has the existing buttons in the right position, so this one is a little easier to do.

Again I unpick the existing buttonstand and open it out to reveal as much fabric as possible, which I then press out flat.

I then fold and press the edges of the new buttonstand to three columns of pattern, with the existing buttonholes in the centre.

It is then a relatively simple process to re-pleate the rest of the edge to create position the new buttonstand in the correct place, following the above diagram as closely as I can. This is stitched through all layers to the front (see right).

It does, however, finish with the edge just short of the collar stand (see left), but this isn’t visible when the shirt is buttoned up.